Indoor Riding Arena 3D Configurator for Arena and Barn Builders
By Facundo Campo, 3D quoting tool developer
In short: An indoor riding arena 3D configurator is a web tool where a horse owner, riding school or club designs a covered arena (width, length, height, walls, doors and stalls alongside), sees it in 3D and requests a quote based on that exact configuration, priced with the builder's own rules.
An indoor riding arena 3D configurator is a web tool where the owner of a horse farm, a riding school or an equestrian club designs a covered arena —width, length, height, walls, doors and, if they want, a row of stalls attached— and sees it in 3D before asking for a price. For the builder, the payoff is simple: the inquiry shows up already sized, and the buyer already understands what they're asking for.
Why a covered arena is hard to quote by eye
An indoor arena isn't just a bigger metal building. It's a clear-span structure with no posts in the middle, with enough clearance for a horse and rider, and it almost always has to fit with everything else on the property: the stalls, the tack room, the wash rack, the path the trailer takes.
When someone writes "how much for a 20 × 40 m arena?" (that's roughly 66 × 131 ft), the builder knows the question is missing half the information:
- Eave height, which drives how much steel goes into each frame and how much sheeting goes on the sides.
- Walls: open so air moves through, half-height to block the wind and keep horses from spooking at what's outside, or fully enclosed.
- Access: a big door for the tractor that drags the footing, walk doors, a covered connection to the stalls.
- How it'll be used: dressage, lessons or jumping change the size and what the buyer expects to see inside.
With all of that open, the quote takes two or three rounds, and each round means a new sketch.
What the buyer builds in an arena configurator
A configurator built for this product asks the buyer the same things an experienced salesperson would, in order, with the 3D model responding to every change:
- Arena size: width (the span) and length.
- Height and roof pitch, with the right structure for that span: truss frame, solid-web frame or a curved roof.
- Walls on each side, with sheeting color and, if needed, a masonry base wall.
- Doors, with their width and height.
- A side lean-to to tie horses in the shade or park equipment.
- Stalls along one side or in an adjoining barn, with tack rooms.
The buyer sees the result the whole time. They can spin the arena around, look at it from above, hide layers to see the frame, and with Walk-through mode walk inside it at eye level. That's the fastest way for someone to get what "clear height" or "half-height walls" actually means.
Arena and stalls in one configuration
An arena almost never sells on its own. Whoever orders a covered arena usually keeps horses on site, and the next question is how the two buildings connect.
That's where a tool that understands both structures earns its keep. Among the public configurators on this site there's one for metal buildings and one for horse stalls, the second with stalls in a row, center-aisle or facing each other, regular or V-shaped doors, wood or barred walls, and a simple or truss-frame canopy over the whole thing. They're the closest thing to try today for an arena: the full product, with the arena and the stalls in the same scene, gets built for each manufacturer on the same engine, which generates the structure from rules instead of hand-made models. I explain that in parametric rendering.
The stalls come from the geometry I developed for the EQUIBOX quoting tool, a horse barn manufacturer in Berazategui, Buenos Aires. You can see how that full system came together in the EQUIBOX case study and, more broadly, in horse stable 3D quoting tool.
What the arena builder gets out of it
An arena is a big project and a decision the buyer thinks over for a while. So what matters most isn't how fast the first number goes out, but that the buyer shows up to the conversation with the basic questions already answered.
- Inquiries with real dimensions. The person asking for a quote already tried 20 × 40 and 25 × 50 m, already checked what fits on their land and already picked the walls.
- Fewer sketches. Your rep doesn't draw anything: the configuration comes with an image and a link that opens it exactly as built.
- Shared decisions. The farm owner sends the link to a partner, the trainer or the vet, and everyone talks about the same arena.
- The shop gets what was sold. Size, frame, doors and walls reach production as data, not as a voice note. I wrote about that in from quote to production.
Arenas also sell a lot at horse shows and farm shows, where the buyer is there with family and has time. Having the arena take shape on a tablet at your booth changes the conversation. There's more on that in selling at agricultural shows.
Pricing, set up for each builder
The public configurators don't show prices. In a project for a manufacturer, the price comes from the same configuration the buyer sees, with a price table the manufacturer manages on their own: steel per kilo, sheeting per meter, doors, labor, delivery. Each builder decides whether to show a reference price on their website or only let the number appear when a rep is logged in.
With arenas this matters, because steel is a big share of the job and its price moves. Update the table in one place and every new quote goes out with today's numbers.
How to get started with your product
I'm Facundo Campo, a software developer based in Quilmes, Buenos Aires, Argentina, and I design and build 3D quoting tools for manufacturers that sell made-to-order products. For an arena, what I need from you is what you already use to quote: the sizes you build, the structure you use for each span, your wall and door options, and a couple of sample quotes. With that, I put together a first version you can try from a link in your browser. I work remotely, in English and Spanish, on Argentina time (UTC−3).
If you build indoor arenas, covered riding rings or barns for horse farms and want to see it with your own sizes, message me on WhatsApp at +54 9 11 6193-3176 or email facundocampo100@gmail.com. You can also read how custom 3D quoting software development works.
Frequently asked questions
Can I try a riding arena configurator today?
The closest one is the metal buildings configurator: spans up to 40 m (about 130 ft), truss, solid-web or curved-roof frames, and several wall options. An arena with its own rules, stalls and access points is built for you on that same engine.
Can the arena and the stalls be shown together?
Yes, that's part of what can be built for your company. The engine already generates canopies and stalls separately; putting them in one scene, with the connection between the two buildings, is part of the custom work.
Can buyers see the arena from the inside?
Yes. The configurators have a Walk-through mode to move through the structure at eye level, layers to hide the walls and see the frame, and a night view to see how it looks under lights.
Does it work at horse shows and expos?
Yes. The configurators run on phones and tablets. If there's no signal at the booth, the quoting tool can be made installable so it works offline, like the one I built for EQUIBOX.
